Rashid Metals, located in Muscat, Oman, stands out as a premier manufacturer and supplier of high-quality metals, with a particular focus on Inconel 600 Forgings. These forgings are celebrated for their remarkable resistance to oxidation, high-temperature corrosion, and impressive mechanical strength, making them perfect for the toughest industrial applications. By blending cutting-edge forging technology with strict quality control measures, Rashid Metals guarantees precision, durability, and long-lasting performance. The company caters to various sectors, including chemical processing, aerospace, marine, power generation, and oil and gas, earning a solid reputation for reliability, prompt delivery, and customer satisfaction as a trusted supplier of Inconel 600 Forgings in Oman.
Inconel 600 Forgings are mainly made up of nickel (72%), chromium (14–17%), and iron (6–10%), along with trace amounts of manganese, silicon, and carbon. This unique blend grants them exceptional resistance to oxidation, corrosion, and high-temperature conditions. On the mechanical side, Inconel 600 Forgings boast high tensile and yield strength, toughness, and good fatigue resistance, even when subjected to thermal cycling. They maintain their structural integrity across a broad temperature range and show moderate hardness and ductility. These characteristics make Inconel 600 Forgings perfect for applications that demand durability, high performance, and reliability in extreme conditions.
Specifications ASTM B564 / ASME SB564, AMS 5766
Flat bar blocks up to 27″ width and 15,000 lbs.
Cylinders and sleeves up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts up to 144″ maximum length and 20,000 lbs.
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015 max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.47 g/cm3 | 1413 °C (2580 °F) | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
| Alloy 600 | N06600 | 2.4816 | NC15FE11M | NiCr15Fe | NCF 600 | NA 13 | МНЖМц 28-2,5-1,5 | ЭИ868 |
The forging process for Inconel 600 typically takes several hours, depending on the complexity and size of the component. Heating, shaping, and cooling are carefully controlled to ensure the desired mechanical properties.
Post-forging operations for Inconel 600 typically include heat treatment to relieve stresses and enhance mechanical properties. Additional processes like machining, surface finishing, and testing may also be required to meet specific application standards.
Inconel 600 forgings require minimal maintenance due to their excellent corrosion and oxidation resistance. Periodic inspection for signs of wear, cracking, or thermal damage is recommended to ensure long-term performance in demanding environments.
Inconel 600 Forgings find extensive use in industries where high strength and resistance to corrosion and heat are crucial. In the chemical and petrochemical sectors, they are utilized in heat exchangers, reactors, and piping systems that handle corrosive substances. The aerospace industry employs them for turbine components, exhaust systems, and high-temperature fasteners. Additionally, the oil and gas, power generation, and marine sectors depend on Inconel 600 Forgings for their reliability and performance in challenging environments.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Rashid Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Muscat, OMAN
Copyright 2024 Rashid Metals. All rights reserved
